Visualizza post
1
Link a medio raggio / problemi con link?configurazione ottimale grazie
« il: Agosto 16, 2007, 09:25:21 pm »
Io da poco tempo mi sono addentrato nel wireless a 2,4 Ghz.
Per prima cosa ho compreto un access point della TREDnet il 610AP ottimo direi pe la mia rete adesso vi spiego :
Il Trednet ho configurato come access point :
Authentication Type: Open System (Default) Shared Key
Transmission Rate: 1 2 5.5 11 6 9 12 18 24 36 48 54 Best
Transmission Power: Full Half
Antenna Select: Antenna 2
ACK Timeout: (Default: 48, Range: 0 ~ 372) 48
Beacon Interval: (Default: 100 Milliseconds, Range: 20 ~ 1000) 100
DTIM Interval: (Default: 1, Range: 1 ~ 16384) 1
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346) 2346
RTS/CTS Threshold: (Default: 2346, Range: 1 ~ 2346) 2346
Short Preamble: Disable Enable enable
Allow 2.4GHz 54Mbps Stations Only: Disable Enable su enable
RTS/CTS Protection Mode: None Always Auto su auto
RTS/CTS Protection Rate: 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps
RTS/CTS Protection Type: CTS-only RTS-CTS su RTS-CTS
Short Slot Time: Disable Enable
antenna esterna settoriale con il guadagno di 21 Db
inoltre proteggo ll link con i mac lavora su canale n.6
Mentre l'antenna osbridge:
Device Information
Device Type: OSBRiDGE 24XLGi
MAC Address: 00:15:d6:02:18:52
Firmware Version: 1.07R4
Hardware Revision: 1
Regulatory Domain: ETSI
Connection Information
Status: Connected
BSSID: 00:0e:8e:7c:dd:49
Signal Strength -73dBm
Signal Quality 89%
Link Quality: 100%
Operational Rate: 36Mbps
Tx Packets: 35
Tx Bytes: 30363
Rx Packets: 1627
Rx Bytes: 227429
Operational Settings
Device Name: OSBRiDGE 24XLG
WLAN Operational Mode: Access Point Client
IP Operational Mode: Bridge
WLAN Mode: 802.11g
Uptime: 1 day, 8:24
System Load: 0.18, 0.08, 0.01
ESSID:
Channel: 6
SSID Broadcast: Enabled
Preferred BSSID:
PPPoE Authorization: Disabled
PPPoE Link Status: Not Connected
Auto Rate Fallback: Disabled
Preamble Type: Long
Beacon Period: 20 miliseconds
Fragmenation Threshold: 2346
RTS Threshold: 2347
Supported Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
DTIM Period: 2
ACK Timeout: 15
CCA Mode: 2
IP Address: 192.168.1.230
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.50.3
DHCP: Disabled
Traffic Shaping: Disabled
Firewall: Disabled
Web Server on port: 80
Authorization Algorithm: Open System
Intra BSS Traffic: Disabled
Wireless Traffic Forward: Enabled
WEP: Disabled
Watchdog: Disabled to IP: 192.168.50.3
Web Login Timeout: 60 seconds
Vorrei sapere qualcosa di come configurare l'antenna e access point nel miglior modo possibile dato che mi trovo intorno a -74dbm.
Vorrei anche sapere cosa sono e a che servono lo splitter l'amplificatore booster e filtri passa banda.
Sono un perito elettrotecnico.
Ringrazio fin d'ora per la VOSTRA cortesia e collaborazione Distinti Saluti SANDRO
Per prima cosa ho compreto un access point della TREDnet il 610AP ottimo direi pe la mia rete adesso vi spiego :
Il Trednet ho configurato come access point :
Authentication Type: Open System (Default) Shared Key
Transmission Rate: 1 2 5.5 11 6 9 12 18 24 36 48 54 Best
Transmission Power: Full Half
Antenna Select: Antenna 2
ACK Timeout: (Default: 48, Range: 0 ~ 372) 48
Beacon Interval: (Default: 100 Milliseconds, Range: 20 ~ 1000) 100
DTIM Interval: (Default: 1, Range: 1 ~ 16384) 1
Fragmentation Threshold: (Default: 2346, Range: 256 ~ 2346) 2346
RTS/CTS Threshold: (Default: 2346, Range: 1 ~ 2346) 2346
Short Preamble: Disable Enable enable
Allow 2.4GHz 54Mbps Stations Only: Disable Enable su enable
RTS/CTS Protection Mode: None Always Auto su auto
RTS/CTS Protection Rate: 1 Mbps 2 Mbps 5.5 Mbps 11 Mbps
RTS/CTS Protection Type: CTS-only RTS-CTS su RTS-CTS
Short Slot Time: Disable Enable
antenna esterna settoriale con il guadagno di 21 Db
inoltre proteggo ll link con i mac lavora su canale n.6
Mentre l'antenna osbridge:
Device Information
Device Type: OSBRiDGE 24XLGi
MAC Address: 00:15:d6:02:18:52
Firmware Version: 1.07R4
Hardware Revision: 1
Regulatory Domain: ETSI
Connection Information
Status: Connected
BSSID: 00:0e:8e:7c:dd:49
Signal Strength -73dBm
Signal Quality 89%
Link Quality: 100%
Operational Rate: 36Mbps
Tx Packets: 35
Tx Bytes: 30363
Rx Packets: 1627
Rx Bytes: 227429
Operational Settings
Device Name: OSBRiDGE 24XLG
WLAN Operational Mode: Access Point Client
IP Operational Mode: Bridge
WLAN Mode: 802.11g
Uptime: 1 day, 8:24
System Load: 0.18, 0.08, 0.01
ESSID:
Channel: 6
SSID Broadcast: Enabled
Preferred BSSID:
PPPoE Authorization: Disabled
PPPoE Link Status: Not Connected
Auto Rate Fallback: Disabled
Preamble Type: Long
Beacon Period: 20 miliseconds
Fragmenation Threshold: 2346
RTS Threshold: 2347
Supported Data Rates: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
DTIM Period: 2
ACK Timeout: 15
CCA Mode: 2
IP Address: 192.168.1.230
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.50.3
DHCP: Disabled
Traffic Shaping: Disabled
Firewall: Disabled
Web Server on port: 80
Authorization Algorithm: Open System
Intra BSS Traffic: Disabled
Wireless Traffic Forward: Enabled
WEP: Disabled
Watchdog: Disabled to IP: 192.168.50.3
Web Login Timeout: 60 seconds
Vorrei sapere qualcosa di come configurare l'antenna e access point nel miglior modo possibile dato che mi trovo intorno a -74dbm.
Vorrei anche sapere cosa sono e a che servono lo splitter l'amplificatore booster e filtri passa banda.
Sono un perito elettrotecnico.
Ringrazio fin d'ora per la VOSTRA cortesia e collaborazione Distinti Saluti SANDRO