Buongiorno,
Sfortunatamente ho fatto un errore e sono "riuscito" a briccare la mia fonera 2.0g (2202) .... : Andry : infatti ho eseguito questa procedura per ottenere l'accesso al Redboot (
http://wiki.openwrt.org/toh/fon/fonera2):
""Enabling Redboot on Fonera 2.0+
Some Fonera 2.0+ units don't have Redboot telnet access enabled by default, however it can be enabled by preforming the following steps:
-Flash a beta developer edition of a firmware onto the Fonera, developer builds have ssh enabled.
-Flash a firmware that is able to write to the Redboot configuration partition, enter:
ssh root@192.168.10.1 cd /tmp wget
ftp://downloads.linwin-solutions.com/hx ... eGOP.image uci set registered.fonreg.dev=1
-Once your Fonera has rebooted, flash a Redboot configuration partition that has telnet enabled:
ssh 192.168.10.1 cd /tmp wget
ftp://downloads.linwin-solutions.com/hx ... rt/out.hex mtd -e "RedBoot config" write out.hex "RedBoot config" rebootWhile your fonera is booting up, you should have about 10 seconds to telnet into 192.168.1.254 on port 9000 to access the Redboot console."
Chiaramente al reset la fonera non rispondeva ....
Sono riuscito, seguendo questa guida (
http://www.matteocicuttin.it/2010/07/07 ... la-fonera/) e tramite cavo jtag, ad installare un redboot funzionante e di seguito ho installato (forse) il nuovo firmware openwrt-atheros-vmlinux.lzma e openwrt-atheros-root.squashfs, con l'uso di un cavo seriale.
Ma ad all'avvio ricevo questo msg:
"No board config data found!
+Couldn't find valid MAC address for enet0. Using default!
... waiting for BOOTP information
Ethernet eth0: MAC address 00:03:7f:e0:02:bf
Can't get BOOTP info for device!
RedBoot(tm) bootstrap and debug environment [ROMRAM]
OpenWrt certified release, version 1.1 - built 12:40:38, Sep 3 2007
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: FON 2202
RAM: 0x80000000-0x82000000, [0x80040290-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
RedBoot> fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0xA8000000 0xA8000000 0x00030000 0x00000000
kernel 0xA8030000 0x80040400 0x00000000 0x80040400
FIS directory 0xA87E0000 0xA87E0000 0x0000F000 0x00000000
RedBoot config 0xA87EF000 0xA87EF000 0x00001000 0x00000000
RedBoot>
"
c'? qualcuno che potrebbe darmi una mano per risolvere il problema ?
grazie/saluti
Andrea
